Skip to content

Hello from USA

Featured Replies

Very nice ride, consition is incredible. Get it a little lower, and thats breadvan heaven!

  • Replies 65
  • Views 6.4k
  • Created
  • Last Reply

Top Posters In This Topic

sorry for being dopy but i had no idea that club polo was international....

wow everyday you learn something new eyy

that is really nice.

This the ONLY bready i like!!!

sorry for being dopy but i had no idea that club polo was international....

wow everyday you learn something new eyy

It's not like the internet is restricted to the UK!

It's the '.co.uk' bit that gives the game away..

Stunning MK2, they need smaller wheels in my opinion but that's a great example of originality at it's best - i particularly like the interior.

Must be a novel little thing over there!

  • Author
ditch the points and fit an accuspark kit. much better!

any more info on that? where can i get it? is it reliable? thanks for the input!!!

its a good mod, search it up on google, done with magnets so no need to adjust points ever again and it runs better and smoother!

got it... Its fairly inexpensive!! i will be getting it!

Hello and welcome..

yep this must be about the 3rd Mk2 in the US, and perhaps the 2nd British one. Both of mine will be coming back to the US with me in 2014 when they finally become 25years old.

I might need to create a US section on here! :)

As for parts EuroCarParts do ship internationally and your US VW dealer can order European parts but you may need to show the correct importation documents for them do so.. and they take a while for them to turn up. Also there is a guy in the US organises a container every now and then and fills it full of European parts which is good for the larger stuff

But if you need anything specific please let me know and I'll try and sort it out for you!! :)

You can get a new distributor from EuroCarParts which I think costs about £130 so circa $200 but you need to make sure its the right one as it took them 3 attempts! :)

If you don't mind me asking who are you insured with and did you have any problems?

There is a green mk1 in the USA too. Someone might remember the chaps user name...I don't...

This car is cute, should be plenty of people who can help you get the right parts bud.

the guy that organizes the container is Jamie from Orchid Euro.. he is about 100 miles from me.. but usually stuff takes a while by container..

the distributor i will be going with accuspark for sure.. I love the concept..

and as for insurance.. www.progressive.com they didnt give me any problems at all... I just had to call to add it to the policy.. and it was fairly cheap too!

There is a green mk1 in the USA too. Someone might remember the chaps user name...I don't...

This car is cute, should be plenty of people who can help you get the right parts bud.

It was DezUU or something like that. But I'm sure he has sold it now. I'm sure there was a picture in PVW in the news section and it was a story about a new business in the US and they were shipping European parts and the picture had a mk2 in a container surrounds by parts.. :) it might have been this one actually!

I believe the green one was sold to a collector that is keeping it closed in a garage.. shame for such a nice car!

  • Author
Very nice ride, consition is incredible. Get it a little lower, and thats breadvan heaven!

I may do a simple air ride over the current shocks.. coilovers will be hard to get here!

sorry for being dopy but i had no idea that club polo was international....

wow everyday you learn something new eyy

i registered here because the car came over from england.. so no better place to start then here :)

that is really nice.

:thumbsup:

This the ONLY bready i like!!!

:thumbsup:

It's the '.co.uk' bit that gives the game away..

Stunning MK2, they need smaller wheels in my opinion but that's a great example of originality at it's best - i particularly like the interior.

Must be a novel little thing over there!

:thumbsup: I'm keeping the 15s for a while until i get tired of them.. I really want a set of bbs RF.. but i cant find anything around here to build around.. the rs i got now are different from the pics.. they are Gold with bigger lips!!

I will take some pics of the current state soon for you guys to see!!

Very nice! Looks in good nick for its age too :thumbsup: Love those checkered seats!

The Dvla sites and how many left etc are shit.

My friend had a category b write off an it's down as insured and on the road

  • Author
Hello and welcome..

yep this must be about the 3rd Mk2 in the US, and perhaps the 2nd British one. Both of mine will be coming back to the US with me in 2014 when they finally become 25years old.

I might need to create a US section on here! :)

As for parts EuroCarParts do ship internationally and your US VW dealer can order European parts but you may need to show the correct importation documents for them do so.. and they take a while for them to turn up. Also there is a guy in the US organises a container every now and then and fills it full of European parts which is good for the larger stuff

But if you need anything specific please let me know and I'll try and sort it out for you!! :)

You can get a new distributor from EuroCarParts which I think costs about £130 so circa $200 but you need to make sure its the right one as it took them 3 attempts! :)

If you don't mind me asking who are you insured with and did you have any problems?

by the way.. where in USA are you moving to? I'm in new york area! the dub scene here is very strong!

and i was able to dig a few pics out of my phone of the new wheels

IMAG0100.jpg

IMAG0101.jpg

IMAG0102.jpg

the wheel stash

IMAG0068.jpg

and the engine that I'm considering

5972103464_202ffae16b_z.jpg

6751325961_2ec23aa192_b.jpg

cellphonepix.jpg

I also ordered the stuff from accuspark :) and a few other goodies!

Edited by King_Joe

the ABA might be a little too large to fit within the bay as I'm sure the ABA is a golf/rabbit engine, the issue with this is that it is what we refer to as being a big block VW engine (leans back and is generally large in comparison to the small blocks that lean forward) they can be made to fit but it is difficult to fit and with the "unique" suspension setup on an early polo the added weight might be detrimental to the handling ability. In an ideal world the the 1.6 AFH/AVY hybrid would be the way to go but I doubt the parts are available in the states. an alloy block would be lighter even more.

I forgot, Welcome to the Forum and the Polo looks great!

  • Author
the ABA might be a little too large to fit within the bay as I'm sure the ABA is a golf/rabbit engine, the issue with this is that it is what we refer to as being a big block VW engine (leans back and is generally large in comparison to the small blocks that lean forward) they can be made to fit but it is difficult to fit and with the "unique" suspension setup on an early polo the added weight might be detrimental to the handling ability. In an ideal world the the 1.6 AFH/AVY hybrid would be the way to go but I doubt the parts are available in the states. an alloy block would be lighter even more.

I forgot, Welcome to the Forum and the Polo looks great!

The aba is not much larger then the g60 engine from the corrado.. i hope it fits... otherwise i will need to get a AFH from england.. the problem is the cost will kinda go up with that since the shipping will probably be killer.

the engine itself is mostly aluminum.. only the bottom is cast iron.. and I got a hold of one fully built with new forged pistons.. HD springs.. titanium valves and the works.. even light weight flywheel and clutch.. i have the scirocco 16v transmission to go with the setup! it will be my winter project.. for now.. I will fix what needs fixed and ride it for the summer months :)

and thanks for the warm welcome guys! :thumbsup:

Welcome to the forum dude 8-)

Like has been said, think you're the only American person on the forum i've ever come across!

The polo looks great :) you must love the amount of attention it gets! I take it it's quite costly to export the car over to the states?

Also running the English front plate looks cool haha

Keep up the good work buddy, will keep an eye on this :thumbsup:

by the way.. where in USA are you moving to? I'm in new york area! the dub scene here is very strong!

Well yet to be determined we were initially going to do Florida as that's where we spend many of our college years but I think I want more interesting country side/driving roads so we are looking at the Carolina's. The family is up in PA...

yeah the shipping might be a pain for the AFH but it might be cheaper when you take into consideration all the custom work needed to get a tall block in there. :)

  • Author

ty sir.. some good reading for sure

Welcome to the forum dude 8-)

Like has been said, think you're the only American person on the forum i've ever come across!

The polo looks great :) you must love the amount of attention it gets! I take it it's quite costly to export the car over to the states?

Also running the English front plate looks cool haha

Keep up the good work buddy, will keep an eye on this :thumbsup:

half american.. lol.. I was born in Brasil. :)

by the way.. where in USA are you moving to? I'm in new york area! the dub scene here is very strong!

Well yet to be determined we were initially going to do Florida as that's where we spend many of our college years but I think I want more interesting country side/driving roads so we are looking at the Carolina's. The family is up in PA...

yeah the shipping might be a pain for the AFH but it might be cheaper when you take into consideration all the custom work needed to get a tall block in there. :)

Florida is not so great economy wise.. Carolinas have good barbecue.. and PA is awesome.. and you will get to see more polos around :)

Them wheels are pure sex! Bit lower and camber on the rear will be winning

Great example, could do with a couple sets of those wheels lol :lol:

  • Author
Them wheels are pure sex! Bit lower and camber on the rear will be winning

Thank you man.. wheels is my specialty.. i love the rs' but i want something different.. maybe compomotives turbo..

Great example, could do with a couple sets of those wheels lol :lol:

they are all for sale.. i can finish to any spec!

  • Author

Accuspark kit came in yesterday.. today i will get it together.. if it all goes right i will be driving tonight :)

  • 3 months later...
  • Author

I'm starting to get air suspension stuff together now.. and my membership package arrived yesterday!! i will have the sticker on it as soon as i go to the garage :)

I'm going to do a very basic bags over coils.. and also decided on the engine swap.. it will be a 1.8 16v that is on my GLI right now.. and run it hoodless for a while until i do a short ram intake so i can close that hood!

Problem with fitting a 'big block' Golf engine is fitting the block and gearbox inbetween the chassis legs. The Salzmann subframe previously mentioned requires a reasonable amount of the front chassis cutting out and re-welding.

^^ Yep, i tried to put a 1.8 in with the later shorter/smaller Golf/Bora gearbox, but i gave up at the point of realising i was gonna have to cut the front chassis legs and engineer a structural subframe.

So the biggest i could use without a paperwork nightmare was the 1.6 16v based on the small 'lean forward' engine (1.1-1.3 Rabbit).

I really do recommend you listen to what people are saying about putting a tall block in a polo.

Yes, it's been done a few times, but we must get 3 people a week who are going to do it regardless of the advice they're given. To date, not one has come back and shown us the finished item. All we've seen so far is cars getting chopped up and scrapped :(

Nevertheless, welcome to the club. It's good to see breadies taking over the world!

Create an account or sign in to comment

Recently Browsing 0

  • No registered users viewing this page.

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.