Skip to content

Nice person

Featured Replies

This is what my Facebook status currently looks like..

Threw the engine together 9pm ready for the MoT in the morning trying to make it in time for a car show, and.. Vrooooom.. BANG clatter clatter damage clatter mince clatter bang clatter oil clatter clatter..

Moral of the story, take your time. :(

It's a universalized status because nobody i know actually knows jack shit about cars. All i was doing was putting the cam carrier back on, having sorted a new dizzy seal/position and subsequently having to re-fit the cam. This for the MoT this morning. But i must've knocked a rocker off it's position..

The cam carrier is split, new one is already sorted. The damage to the head isn't terminal, just heavy surface marks, but the impact into the ally has interfered fractionally with the very top wall of the tappet bore. Not much of a problem, as the tappet still moves quite naturally so i'll just polish it out. The tappet will be renewed. The roller rocker will be renewed. The fucking cam will have to be renewed too, as one lobe is affected and the one in question is more than affected.

So no MoT today, which means that even if this tropical storm gets lost, it's not gonna be legal for poloshow at all this weekend.

I'll still be there tomorrow, i'll just have to go in the Golf. It's just well frustrating having it finally ready for the road after, well over a year now, only to smash the head up on show day.

The mrs is in hiding, knowing that had she not been a idiot whenever the weather was good, i'd have had it done weeks ago. But i could've just gone full alpha to have sorted that, so it's my fail.

In b4 cool story bro

  • Replies 11
  • Views 1.3k
  • Created
  • Last Reply

Top Posters In This Topic

Needs more vroom, clatter, bang and Shit.

Strange that only 1 section went. Maybe the carrier splitting was the cause of it all.

Hope you get it sorted ddo.

Ah mate :-(

Sounds like my kind of luck, something always fucks up within 24h of a show. Let hope tomorrows different!

  • Author

Pretty sure i just knocked the rocker off line when putting the carrier on, they literally just sit on the top, by gravity until sandwiched down by the carrier, barely clipped onto the ball-top tappet head. The cam lobe hit the frame of the rocker, missing the roller, and all the damage was of the lobe bashing it about as it had nowhere to go. It's only mildly damaged the surrounding alloy, but has put enough of a crack in the carrier for it to leak.

The surface/cosmetic damage to the valve spring collet makes me think i'm lucky to have not bent a valve - measured it all up against the neighbouring one and it's straight, compression seems okay on the plug gauge.

Got a 1.4 MK4 Golf head and a 9n 1.4 Sport head, not sure if the latter has the 100bhp cams or not, think i'm gonna put the 9n exhaust cam in and run that in the vvt head if it'll work. I'll have to measure the difference between the three cams and see what'll work and how to time it.

Meanwhile, if anyone's got a spare Polo GTi carrier with cams, i might[ be interested. Depends if the parts i have are sufficient.

Awww, bummer. I got close to finishing mine, but I'm glad I wound back on friday and didn't rush to get mine done. Would have hated to be in a similar situation

Pretty sure i just knocked the rocker off line when putting the carrier on, they literally just sit on the top, by gravity until sandwiched down by the carrier, barely clipped onto the ball-top tappet head. The cam lobe hit the frame of the rocker, missing the roller, and all the damage was of the lobe bashing it about as it had nowhere to go. It's only mildly damaged the surrounding alloy, but has put enough of a crack in the carrier for it to leak.

The surface/cosmetic damage to the valve spring collet makes me think i'm lucky to have not bent a valve - measured it all up against the neighbouring one and it's straight, compression seems okay on the plug gauge.

Got a 1.4 MK4 Golf head and a 9n 1.4 Sport head, not sure if the latter has the 100bhp cams or not, think i'm gonna put the 9n exhaust cam in and run that in the vvt head if it'll work. I'll have to measure the difference between the three cams and see what'll work and how to time it.

Meanwhile, if anyone's got a spare Polo GTi carrier with cams, i might[ be interested. Depends if the parts i have are sufficient.

I think I may have a polo 6n2 Gti cams and carrier if your interested??

  • Author

^^ Maybe, i have one from a 75bhp 1.4 16v Golf engine and a 100bhp 1.4 16v Polo engine, ironically the former has the vvt casting which just needs machining to take the switch (i can do that at work), gonna measure the cam profiles of all three types of exhaust cams and see which one i'm best using.

If it turns out to be that the GTi one is gonna work best, i think likely but not necessarily so, i've been offered two so far and will obviously check you for a price. :thumbsup:

love how you said you still took it for a drive though! :lol: ledgend hahaha!

bloody m1 was jammed earlier so i ended up driving through MK! coulda picked them bloody trumpets up if id had your number! :lol:

good to meet you though dude

Nice to know you're real not just a bot, you'll fix it in no time!

I know the feeling man, gutted to hear this! :(

Yeah Nick, I just bought a crank off him, he's not a bot! Taking my time has sorted me for the future, that, and never trust anyone else's work!

  • Author

Likewise Eric, yeah with only one exhaust valve operating there must've been some compression going on, most was firing back out the 4th carb once the piston topped out - it wouldn't have been so bad had i not had two HT leads around the wrong way and it was still quicker than the MH..

Tuning expert of the year 2012!

Harris, good to see you too, your 2F looks fine, when are you gonna sort your avatar out? Soz i know, it's too soon.. :smirk:

Adam knows my packaging skills, pure hand crafted goodness.

I've just realised there's no gore in this thread, that won't do:

161.jpg

Create an account or sign in to comment

Recently Browsing 0

  • No registered users viewing this page.

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.