so here she is, my mk1 20vt. I've had her for about a year now, bought it of a good mate of mine who did the conversion and sold it not long after finishing it. its a 1.3 golf driver shell and started life in mars red. Shes got the AGU 20vt engine with the hydraulic clutch which is currently pushing 318 BHP and amazingly runs like a monster, puts e46 M3's and audi RS4's to shame!

I've still got plans for her and hoping to sort them out within the next couple of weeks;

- Rear disk conversion and uprate the front disks

- Forged conrods (ordered so should be here with the next couple of weeks)

- polycarbonate windows

- front anti roll bars need fitting

- g60 steels

- Full stainless exhaust straight from the turbo manifold

- could do with a customer screamer pipe, straight from the flange coming out of the bonnet or the wing

- 2 piston dump valve

- Set the Gizmo MS IBC boost controller AGAIN!

- Golf GTI fuel tank

- New radiator

- Polish and port the head

- Lightened flywheel

- hopefully a full respray in the winter when shes of the road

looking to get around 450+ BHP out of her but il see how things go hey!

Here she is:

This is the only picture i can find.

They bay looks well messy is the picture (was taken a while back). the wiring's now been neatened up, its had a new rad,air filter, new hoses and a good old scrub!

Hopefully the bullet steels will be coming off soon for a set of G60 steels or compomotives....

Edited 22 October, 201213 yr by dub_singh

Your a lucky man with this and the Polo I need a mk1 golf in my life and I'd even settle for the 1.3 lol

Any engine bay shots dude

Cracking mk1

WUB <3

I'd imagine this will murder a hell of a lot faster cars than M3s! My mate has just finished fitting a BAM into his mk1 running 290bhp, and there can't be much faster than that out and about. So this must be ridiculous

Your a lucky man with this and the Polo I need a mk1 golf in my life and I'd even settle for the 1.3 lol

Any engine bay shots dude

Cracking mk1

Cheers pal, yeah I've got some pictures of the engine bay, will upload tomorrow mate.

nmkrl3fr'[0u8138r90 n=-tf94uobn vkf'bhnkoqspfbnwepqfpQIOW< CREAM

<3

Not sure on that cage design.... who made that

450bhp!!!

Not sure on that cage design.... who made that

the chap who owned it before me, not really fused about the cage to be honest, as long as it serves its purpose i dont really care how it looks

Not sure on that cage design.... who made that

the chap who owned it before me, not really fused about the cage to be honest, as long as it serves its purpose i dont really care how it looks

It's whether the cage will serve its purpose safely which Ben is questioning!

But unless you're planning on rolling the car then its not too big a deal What management is this running fella?

Not sure on that cage design.... who made that

the chap who owned it before me, not really fused about the cage to be honest, as long as it serves its purpose i dont really care how it looks

It's whether the cage will serve its purpose safely which Ben is questioning!

But unless you're planning on rolling the car then its not too big a deal What management is this running fella?

Ohhh, yeahh it will serve its purpose safely! :-D

its currently running standard management mate, i am looking into buying a standalone management but the figures are pretty steep . pal of mine just fitted standalone to his 20vt and apparently runs awesome with the launch control

Edited 26 July, 201214 yr by dub_singh

318bhp out of an AGU with standard mangement? List of mods please

Good luck with the big power build too!

Not sure on that cage design.... who made that

the chap who owned it before me, not really fused about the cage to be honest, as long as it serves its purpose i dont really care how it looks

It's whether the cage will serve its purpose safely which Ben is questioning!

Ye exactly this......

Not sure on that cage design.... who made that

the chap who owned it before me, not really fused about the cage to be honest, as long as it serves its purpose i dont really care how it looks

It's whether the cage will serve its purpose safely which Ben is questioning!

Ohhh, yeahh it will serve its purpose safely! :-D

you reckon? I think you'd be surprised......

Leave bullet steels on!!

318bhp out of an AGU with standard mangement? List of mods please

Good luck with the big power build too!

Surprisingly there arnt many to list, all its got is a T3/T4 universal turbo, custom manifold and a stage 2 remap. got it on the dyno and it reached 318 bhp, I've miss placed the damn print out

AMAZING!

Looks awesome! If i ever kill the 1.5 in my mk1 I'm going either zx6r carbed abf or 20vt! It's the way forward!

Gave her a wash on the week end and had plans to park her up for the winter but I've now changed my mind and decided the sell her as I've just purchased a mk2 rs2000 and I've also got the mk2 rallye which needs a few bob spending on . heres a few pics

Heres my rallye:

The mk1 is now up for sale guys, check out the forsale section. I'm open to sensible offers :-)

Edited 21 October, 201213 yr by dub_singh