Skip to content

What Did You Do To Your Polo Today?

Featured Replies

Discovered first hand why you don't hit the limiter when you have toothies on.

null_zps5f35a34e.jpg

Oopps :(

  • Replies 1.7k
  • Views 82k
  • Created
  • Last Reply

Top Posters In This Topic

Most Popular Posts

  • Took the 6n for a 60 mile drive today, got filmed driving it & I was interviewed for an upcoming TV series "World's Deadliest Drivers". They'll be using my dashcam footage from both of my accident

  • dougstar21
    dougstar21

    This is you Mark: Changed the oil filter today. Changed the spark plugs today. Topped up the screen wash today: Replaced the rear tyres today: That poor engine is never in the car! Ha ha.

  • Well my car has now gone on its own little travels Next time I'll see her she will be outside our house in the USA

Posted Images

Discovered my driver side wiper isn't as tight as it should be at 60mph in the rain,it was wiping the door mirror but not much else :smile:

  • 3 weeks later...

Polished rocker. Decided not to paint it black. Wanted to. (VHT black then 2K spraymax lacquer) but bottled it.

240, 400, 800, 1200 grit. then autosol on a buffer pad/drill

post-36670-0-56949600-1401043139_thumb.j

Tried to race my mates r33 skyline... Like it ever had a chance haha

also swore at it for not running properly when cold and swore at it some more for its shitty squeaks and knocking noise.

thought about washing it but it hasn't earned it. (i prefer it when all the scratches are covered in shit, it makes them harder to see). :)

Thought about it and wished there wasn't so much bullshit paperwork to be filled out in Spain so I could be driving it already.!!

:x

Realised that the 'jap spec' bumper trim just had a shorter plate recess, not deleted as previously though. Never mind, it got fibreglassed and painted along with the rest of the front bumper.

From This:

NVaFsi3.jpg

to this

ZjvQQWg.jpg

And the monthly occurance of considering replacing it with a newer car, this time with a 9n3 GTI :/

Edited by Starry

"toothies on"

whats that mean

Fitted subwoofer and amp only to realise the remote cable had turned to dust, only bought last week!

Went to halfords got a new remote cable and it works wooo.

Also cleaned it at usual.

Today I colour matched (or close enough) some center console Stuff!

Gtyr9IX.jpg

had the engine out fo the blue GT on sunday as I knew mon would be a typical bank holiday

20140525_144533_zpsb9721531.jpg

20140525_165403_zpsbddd2e7e.jpg

used a trolly jack and some wood blocks. worked a treat

decided to fit my coilovers but a snapped allen key on the fronts stopped play.end of the allen key is still in,but a magnet should remove it as its loose

then messed about again trying to solve shit running with no power which its had from day one.

she now goes like a train,very happy boy

will attempt coilovers again in a few days after plenty of wd40 soaks

Chased motorbikes and gave it a new noise to diagnose!!

Continued stripping it down, in preparation for sanding :)

Edited by DansCoupe

Made a manifold.

Looks shite but it'll do the job and the runners match the oval ports.

10295433_894152897278643_182365633701942

Got the supercharger back on after it's rebuild. Only been off the road for a week but I've missed it. Now I just need to remember to take it easy for a few hundred miles.

Car started making a horriffic metal on metal scraping sound, so pulled over at the size of the road to take a look, and it turned out to be my rusted brake guards catching on the disks, so I bent them back a little so they no longer catch.

The noise was catastrophic. :tongue:

May give her a clean and put the wheel trims back on later. Then continue pondering whether or not to sell...

Edited by acme15

Well it was yesterday not today, but, set fire to it. Then ripped the dash apart to try to work out what was making the mysterious smoke.

Edited by Depresion

Fault finding on my mk2f gt coupe as its not starting thought it was in line fuel pump but it is priming so do not think that is the problem now. Am so pissed off as am scratching my head a lot as I am clueless :-(

Also am trying to get a oil pressure switch can not find one they all have different pressure rates my one needs 0.15-0.45

Edited by 1vw2many

I removed a knackered central locking pump and I felt very proud about it :)

Swapped out he engine to a similar 1.3 which had had everything renewed (gaskets and such, valves lapped) a GT can and double sprung valves.

Also changed the gear box as the new one is slightly younger and has a G40 clutch.

Fitted and wired in the electric fuel pump, the inertia cut off and a separate dash switch for the pump.

Fitted the manifold and cbr600 carbs and got it all fired up and running nice.

Changed the read to a newer one.

Fixed the hazard light issue.

Found I couldn't fit the new manifold and exhaust until i get a bung or something in the stainless manifold.

Resolved all the issues and ceased bolts etc associated with the above - now want a beer.

Got forced into a hedge by a van driver who decided it was beneath him to stop and apologise for being an utter ****, stood there looking at three big scratches that ran down the entire length of the passenger side in dismay, door handle has a gouge out of it, mirror shell is ruined...

The door handle and mirror shell won't cost much, and the scratches will polish out thankfully, but I'm not a happy bunny!

Not today I guess but picking up another coupe at the end of the month so I'll be back on here a bit more, gutted

No plans for it I wanted too make it mental like 200bhp+ then realised its a toy car and no decent engines fit :( it was cheap and I'm bored of spending money on my e36

Edited by matt-c

Tested the brakes when someone pulled out in front of me... Why is everyone trying to kill me?! :tongue:

  • 9 months later...

Hi all, just testing the water really to see if a community "project log" type thread would be popular on here, as we seem to be missing one. They are all the rage on my main home, the Overclockers UK Motors sub-forum. :smile:

To get the ball rolling (if indeed the ball moves at all :tongue:) today I have re-trimmed my steering wheel, and my gearstick, added knurled metal heater controls, added chrome dial surrounds, replaced my airbag with a later model (different texture and different logo colours), moved my stereo down to the other slot and did some cable management, and vinyl wrapped my steering wheel spokes in silver.

A quick before and after:

npUlSHp.jpg?1

OR0hez8.jpg?1

Edited by acme15

We do.... let me see if I can find it :)

Create an account or sign in to comment

Recently Browsing 0

  • No registered users viewing this page.

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.