Skip to content

What Did You Do To Your Polo Today?

Featured Replies

Fit the GT multipoint injection and you should see even more gains I'd say.

Today I fixed the passenger door on the 6n2, wouldn't open from the inside. Drilled a new hole in the handle for the rod to go through and it was sorted. Should stop the missus complaining until she finds something else she doesn't like about the car. Haha.

  • Replies 1.7k
  • Views 82k
  • Created
  • Last Reply

Top Posters In This Topic

Most Popular Posts

  • Took the 6n for a 60 mile drive today, got filmed driving it & I was interviewed for an upcoming TV series "World's Deadliest Drivers". They'll be using my dashcam footage from both of my accident

  • dougstar21
    dougstar21

    This is you Mark: Changed the oil filter today. Changed the spark plugs today. Topped up the screen wash today: Replaced the rear tyres today: That poor engine is never in the car! Ha ha.

  • Well my car has now gone on its own little travels Next time I'll see her she will be outside our house in the USA

Posted Images

I think the mpi set up is about as common as the aforementioned stuff, people say that they are all over the place but when you actually look, what (rarely) does come up for sale is snapped up in seconds off facebook. Fair enough, this bullshit keeps the prices low on the whole but I think that the digifant does command some dollar (£100 some guy wanted for a ported manifold!).

How about a weber off a 1.8 golf? Cheap and available. Bolts (more or less) straight on, swirl pot from a pierburg carb and a low pressure pump, big chrome k/n on the top and a manual choke. The holes in it might be a bit big but that can be sorted with a thin head gasket to give it a bit more suck. It would look pukka all polished up, sound a treat and go a bit, too, I reckon.

I picked up my setup quite cheap, think in total it's cost me just over £130, that's with a ported GT inlet, GT cam and all the loom and GT specific bits. Had to piece it all together though.

That's good going, you'll definitely be wanting to cam and pipe it up for that. From what I can gather, the digifant is a good set up apart from old sensors but, you must agree, ugly to look at. I'll be running it on the bready but I'd prefer less electronics, even though they work well. Go with what you've got and that codgerness will substantially diminish. Best of luck finding the tree that gt cams grow on, maybe one nearby is blooming with gt rear beams..

I've often wondered if you had the mpi inlet mani and injectors , is there a more modern ecu from another car /megasquirt etc that would be a better option

Got a GT rear beam sitting in my garden, just saying. Haha.

I've often wondered if you had the mpi inlet mani and injectors , is there a more modern ecu from another car /megasquirt etc that would be a better option

I've been looking into standalone ECUs for my turbo but the same idea can be made to work with a GT. You can get ones that run off throttle position and work with a dizzy. Two things that the GT has already so just making up a section of loom to mate the new ECU to the GT wiring would be all that is needed. But factoring the cost of the ECU then a RR session would soon make it rather expensive.

Might have to take that gt beam off you at polo show steve if you want to sell it...

Today I got use of some tools and gas in the garage I used to work in and we managed to whizz the crank pulley bolt out so my chain can be changed. Ordered a new bolt too as this one is rhubarb now.

Also found some blue gt seats front and rear near me and have done a deal so picking them up Friday. After the engine and seats I'll be a beam, clocks and gearknob short of a GT breadvan

Edited by wizardmanjm

I've often wondered if you had the mpi inlet mani and injectors , is there a more modern ecu from another car /megasquirt etc that would be a better option

I've been looking into standalone ECUs for my turbo but the same idea can be made to work with a GT. You can get ones that run off throttle position and work with a dizzy. Two things that the GT has already so just making up a section of loom to mate the new ECU to the GT wiring would be all that is needed. But factoring the cost of the ECU then a RR session would soon make it rather expensive.

Yeah, it's knowing how far to go, one step too much and tuning can turn into an expensive, miserable business of rough running, poor starting, heat, vibration, harshness and ultimately clattering noises, smoke and good friends with a tow rope. I spent too much of my youth on melted pistons and crank rebuilds but what was always the most fun was cammed up small euroboxes which rarely needed working on.

Might have to take that gt beam off you at polo show steve if you want to sell it...

Today I got use of some tools and gas in the garage I used to work in and we managed to whizz the crank pulley bolt out so my chain can be changed. Ordered a new bolt too as this one is rhubarb now.

Also found some blue gt seats front and rear near me and have done a deal so picking them up Friday. After the engine and seats I'll be a beam, clocks and gearknob short of a GT breadvan

I've got some genesis clocks knocking about if you want them, they're the same. Someone's selling a conversion quite cheaply on here at the moment. Good luck with the beam..

Sorry John but the beam is for one of my Polos, probably the mk2 when I get round to working on it.

Yeah I'm not expecting to find one any time soon unless steve let's his go lol

Yeah apparently the redline on gt is 6.5k and normal genesis is 6k but other than that they are the same, what do you want for the clocks rico? Can pm of you want

Edited by wizardmanjm

Yeah apparently the redline on gt is 6.5k and normal genesis is 6k but other than that they are the same, what do you want for the clocks rico? Can pm of you want

Someone has been listening to me :)

Yep, I am your the best tutor steve [emoji4]

Edited by wizardmanjm

Tryed fixing it again lol

Yeah I'm not expecting to find one any time soon unless steve let's his go lol

Yeah apparently the redline on gt is 6.5k and normal genesis is 6k but other than that they are the same, what do you want for the clocks rico? Can pm of you want

I don't know, £20?

Got a GT rear beam sitting in my garden, just saying. Haha.

Me too, and gt 'box, arb blocks, 4branch, steering damper, mpi, polished 6n rocker cover, all that good stuff. But so has everyone else, common as muck.

Yeah I'm not expecting to find one any time soon unless steve let's his go lol

Yeah apparently the redline on gt is 6.5k and normal genesis is 6k but other than that they are the same, what do you want for the clocks rico? Can pm of you want

I don't know, £20?
Will that include post if I add a couple quid for PayPal fees? Would have to do it on Friday as I've spent way too much money out of this pay and I'm skint now lol

I'll fish 'em out during next week, pm me when you're set.

Got a GT rear beam sitting in my garden, just saying. Haha.

Me too, and gt 'box, arb blocks, 4branch, steering damper, mpi, polished 6n rocker cover, all that good stuff. But so has everyone else, common as muck.

I wish it all was as common as muck.

It just bugs me when people say they are when they are patently not, being all smug because they have got themselves sorted. Maybe I'm a bit thick but I was after a cam for yonks and I'm not doing so well finding some scirroco or corrado seats. I suppose they are easy to get, too. Grrr.

Some breadhead will realise and the prices will reflect that demand is much bigger than supply and, hey ho, were into the scene which kills the fun, just another damn dub. I wonder what a rear beam will fetch then..

Get your ass moving, wizardman, while you still can.

Anyway, blow me, I'm sorted.

Nah, smug don't fit, I can't pull it off.

Yeah rico that's exactly the same as I have experienced. I've checked every week for scirocco seats now for months and nothing, I struck lucky on some polo gt seats recently and I've just been buying stuff as soon as I see them now regardless of what my account is looking like.

I was looking for a GT cam for as long as I've had this polo and only managed to snap one up recently. In terms of a rear beam. I haven't seen one for sale till this day. And god knows what the asking price will be when I do find one.

I was a bit of a breadhead when I had my 106 thinking rallye stuff was common, I had a full interior, bumpers and arches, and found an inlet manifold too before I sold it. Out of pure curiosity I searched time to time for those items and it turns out I was just super lucky. They never come up and that's why people in 106 owners were doing there nut at me lol

Edited by wizardmanjm

It's not that the stuff isn't there to be had, it's just it gets snapped up so damn quick. I'm lucky as I've broken a couple of G40s and used a GT as my project car. So if you add things up the rear beam I've got sitting probably owes me a small fortune.

But everything is getting more rare as time goes on. Think about how many GTs were probably scrapped years ago, possibly during the scrappage scheme. Pretty sure I saw a G40 was scrapped during that scheme too.

I got a cracking 61k gt conversion only because I saw it on here and bagged it immediately. Luckily about 5 other people had a dither 'cos it was a fair wedge but they dibbed it if I bottled.

Sod that and I got the lot, interior, panels, everything.

At the time, I probably paid top dollar as the consensus was that they're 10 a penny. 8 months on, I'd laugh at any offer less than double. The trend will inevitably push prices up, whatever you've got sunk in that beam, you won't lose in the longer run. It looks like it's on the turn now. If I offered a full gt conversion for a grand (including the beam!) the choice would be; pay me or do without. Most would do without but.. Anyway, I'd rather have a sweet GT than a bag of sand.

Create an account or sign in to comment

Recently Browsing 0

  • No registered users viewing this page.

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.