I'm going to be breaking my mk2 coupe s 'b34 tyg' is the plate. Its a shame as its comet blue but its been too neglewcted by previous owners for me to economically restore it.

Its all available, will get pics asap on request.

The shell is pretty solid underneath, just the rear valance is rusty. Will be offered up for free as a rolling shell when the other bits are gone.

Some of the mods on the car

Brake lights are german spec so no rear reverse light £30

HK engine, new genuine vw cambelt and waterpump less than 100 miles ago. about 80 thousand miles off the top of my head £80 without the carb

Coupe s alloys (matt black-no centre caps) with legal tyres £100

Weber 32/34 dtmr carb conversion £60

GED Brace bar £30

Full gt airbox including grill induction plate £40

Recaro sr mitsubishi evo 4 seats in very good condition (some bolster wear on drivers side) with standard frames £300

Brand new nos mk3 vw sump and gasket £50

Pair mk3 door handles £20

Theres plenty more but i cant think atm, will update as I'm going through all of my parts

Daym you for breaking a comet blue! Makes mine rarer though i suppose!

I'm after a bonnet if yours is any good!

Tempted by the brace bar too. Hmm

I'm going to be breaking my mk2 coupe s 'b34 tyg' is the plate. Its a shame as its comet blue but its been too neglewcted by previous owners for me to economically restore it.

Its all available, will get pics asap on request.

The shell is pretty solid underneath, just the rear valance is rusty. Will be offered up for free as a rolling shell when the other bits are gone.

Some of the mods on the car

Brake lights are german spec so no rear reverse light £30

HK engine, new genuine vw cambelt and waterpump less than 100 miles ago. about 80 thousand miles off the top of my head £80 without the carb

Coupe s alloys (matt black-no centre caps) with legal tyres £100

Weber 32/34 dtmr carb conversion £60

GED Brace bar £30

Full gt airbox including grill induction plate £40

Recaro sr mitsubishi evo 4 seats in very good condition (some bolster wear on drivers side) with standard frames £300

Brand new nos mk3 vw sump and gasket £50

Pair mk3 door handles £20

Theres plenty more but i cant think atm, will update as I'm going through all of my parts

Can i take dibs on the shell?

I'm going to be breaking my mk2 coupe s 'b34 tyg' is the plate. Its a shame as its comet blue but its been too neglewcted by previous owners for me to economically restore it.

Its all available, will get pics asap on request.

The shell is pretty solid underneath, just the rear valance is rusty. Will be offered up for free as a rolling shell when the other bits are gone.

Some of the mods on the car

Brake lights are german spec so no rear reverse light £30

HK engine, new genuine vw cambelt and waterpump less than 100 miles ago. about 80 thousand miles off the top of my head £80 without the carb

Coupe s alloys (matt black-no centre caps) with legal tyres £100

Weber 32/34 dtmr carb conversion £60

GED Brace bar £30

Full gt airbox including grill induction plate £40

Recaro sr mitsubishi evo 4 seats in very good condition (some bolster wear on drivers side) with standard frames £300

Brand new nos mk3 vw sump and gasket £50

Pair mk3 door handles £20

Theres plenty more but i cant think atm, will update as I'm going through all of my parts

Can i take dibs on the shell?

Yeah sure, ill get some pics of everything on tuesday. The car is located near kings lynn norfolk, so the shell will be collection from there.

I'm going to be breaking my mk2 coupe s 'b34 tyg' is the plate. Its a shame as its comet blue but its been too neglewcted by previous owners for me to economically restore it.

Its all available, will get pics asap on request.

The shell is pretty solid underneath, just the rear valance is rusty. Will be offered up for free as a rolling shell when the other bits are gone.

Some of the mods on the car

Brake lights are german spec so no rear reverse light £30

HK engine, new genuine vw cambelt and waterpump less than 100 miles ago. about 80 thousand miles off the top of my head £80 without the carb

Coupe s alloys (matt black-no centre caps) with legal tyres £100

Weber 32/34 dtmr carb conversion £60

GED Brace bar £30

Full gt airbox including grill induction plate £40

Recaro sr mitsubishi evo 4 seats in very good condition (some bolster wear on drivers side) with standard frames £300

Brand new nos mk3 vw sump and gasket £50

Pair mk3 door handles £20

Theres plenty more but i cant think atm, will update as I'm going through all of my parts

Can i take dibs on the shell?

Yeah sure, ill get some pics of everything on tuesday. The car is located near kings lynn norfolk, so the shell will be collection from there.

Oh, not cannock then? Not to worry. Would love this as a project for my other half.

Not the shell I'm afraid, i can get just about everything else to cannock though

parcel shelf, shelf supports, tailgate strut, rear wiper arm.

probably more bits, i'll see the car today so i'll check.

cheers.

what engine was the webber on could really do with this

what engine was the webber on could really do with this

The weber is a 32/34 dtrm on a hk 1300 solid lifter engine.

The weber will come with the correct manual choke lever for the dash. I can sell it with the inlet attatched for collection as it would make it a bolt on mod but for postage it would it would have to be just the carb and adapter plate for weight reasons.

I've also got a g40 turbo k03 manifold for sale. The head face is slightly warped so will need machining £40

Got some pics of the car

Edited 25 August, 201214 yr by shaun_89

I will take the HK!

I will take the HK!

Oi!! Lol

I will take the HK!

No problem, just give me some cash

Off topic but do you own the turbo'd small block mk1 rocco (brown one i think)? Lovely car, I've got a mk2 scala I've wanted to put a small block turbo in.

Edited 25 August, 201214 yr by shaun_89

I will take the HK!

Oi!! Lol

I assumed you would be putting yours back in? Should have PM'd you first

I will take the HK!

No problem, just give me some cash

Off topic but do you own the turbo'd small block mk1 rocco (brown one i think)? Lovely car, I've got a mk2 scala I've wanted to put a small block turbo in.

I will PM you in a sec to send a deposit

Yes thats mine. although its no longer turbo'd that what I want the HK for. I'm selling most of the bits you would need to convert your Mk2 to small block spec.

The exhaust is standard (pattern part) and less than 100 miles old. Downpipe back £65

Nah winston I'm putting a NZ in for now. Hk is still going :)

I will take the HK!

Oi!! Lol

I assumed you would be putting yours back in? Should have PM'd you first

I will take the HK!

No problem, just give me some cash

Off topic but do you own the turbo'd small block mk1 rocco (brown one i think)? Lovely car, I've got a mk2 scala I've wanted to put a small block turbo in.

I will PM you in a sec to send a deposit

Yes thats mine. although its no longer turbo'd that what I want the HK for. I'm selling most of the bits you would need to convert your Mk2 to small block spec.

No problem, do you want the engine with the carb? Its on a 4 speed box but if you want it its included for free.

Ignore the grill blank in the pic, I've got the proper grill air feed plate for the gt airbox

The 3 speed fan is no longer available

Heater unit £20 I've got spare working resistors for the fan speed aswell

2x mk3 coils 1 is genuine vw the other is beru, both worked fine when removed £15 each

Edited 25 August, 201214 yr by shaun_89

parcel shelf, shelf supports, tailgate strut, rear wiper arm.

probably more bits, i'll see the car today so i'll check.

cheers.

pretty please ?

Free shell you say, I'm listening...

ill take the K03 mani mate, drop me payment details

Free shell you say, I'm listening...

The shell is already prov sold. Will let you know if it falls through.

parcel shelf, shelf supports, tailgate strut, rear wiper arm.

probably more bits, i'll see the car today so i'll check.

cheers.

pretty please ?

Havnt got the parcel shelf I'm sorry.

Havnt got a rear wiper on the car although i may have some in my garage collection

I've got the shelf supports, so will get these off the car and make sure there is no damage.

Ill take off the strut when I've checked the shelf supports. Pm me an offer on them

ill take the K03 mani mate, drop me payment details

PM'd

what engine was the webber on could really do with this

The weber is a 32/34 dtrm on a hk 1300 solid lifter engine.

The weber will come with the correct manual choke lever for the dash. I can sell it with the inlet attatched for collection as it would make it a bolt on mod but for postage it would it would have to be just the carb and adapter plate for weight reason.

Aup mate, would the Weber fit a standard 1l? Really interested in this so please let me know :)

what engine was the webber on could really do with this

The weber is a 32/34 dtrm on a hk 1300 solid lifter engine.

The weber will come with the correct manual choke lever for the dash. I can sell it with the inlet attatched for collection as it would make it a bolt on mod but for postage it would it would have to be just the carb and adapter plate for weight reason.

Aup mate, would the Weber fit a standard 1l? Really interested in this so please let me know :)

It would fit, however is a bit overkill and would need re-jetting for a 1043cc, you should have the hk engine aswell