Choke cable handle please? Should just unscrew from the choke cable. Or I'll take the full cable if its easier

Do you still have the Weber 32/34 dtmr carb conversion for £60? If so do you know if its a straight job to fit ( if it fits ) onto my 2G engine (mrk2 coupe s G REG) ? If it is I will take it NOW. Everything I need with it to bolt on and go including choke cable etc.

I'm going to be breaking my mk2 coupe s 'b34 tyg' is the plate. Its a shame as its comet blue but its been too neglewcted by previous owners for me to economically restore it.

Its all available, will get pics asap on request.

The shell is pretty solid underneath, just the rear valance is rusty. Will be offered up for free as a rolling shell when the other bits are gone.

Some of the mods on the car

Brake lights are german spec so no rear reverse light £30

HK engine, new genuine vw cambelt and waterpump less than 100 miles ago. about 80 thousand miles off the top of my head £80 without the carb

Coupe s alloys (matt black-no centre caps) with legal tyres £100

Weber 32/34 dtmr carb conversion £60

GED Brace bar £30

Full gt airbox including grill induction plate £40

Recaro sr mitsubishi evo 4 seats in very good condition (some bolster wear on drivers side) with standard frames £300

Brand new nos mk3 vw sump and gasket £50

Pair mk3 door handles £20

Theres plenty more but i cant think atm, will update as I'm going through all of my parts

Edited 26 August, 201214 yr by TheMitch1

what engine was the webber on could really do with this

The weber is a 32/34 dtrm on a hk 1300 solid lifter engine.

The weber will come with the correct manual choke lever for the dash. I can sell it with the inlet attatched for collection as it would make it a bolt on mod but for postage it would it would have to be just the carb and adapter plate for weight reason.

Aup mate, would the Weber fit a standard 1l? Really interested in this so please let me know :)

It would fit, however is a bit overkill and would need re-jetting for a 1043cc, you should have the hk engine aswell

I would have the hk aswell but as I'm a student and paying 2k for fully comp on my 1043 I can't afford a bigger engine :( one day though haha. Seems like you have a bit of interest in the hk anyway will deffinately have the weber though, can collect too as I'm only an hour or so away

Do you still have the Weber 32/34 dtmr carb conversion for £60? If so do you know if its a straight job to fit ( if it fits ) onto my 2G engine (mrk2 coupe s G REG) ? If it is I will take it NOW. Everything I need with it to bolt on and go including choke cable etc.

I've still got the carb conversion, I've got everything you should need. Its already jetted for a 1272cc so should work straight away

I'm going to be breaking my mk2 coupe s 'b34 tyg' is the plate. Its a shame as its comet blue but its been too neglewcted by previous owners for me to economically restore it.

Its all available, will get pics asap on request.

The shell is pretty solid underneath, just the rear valance is rusty. Will be offered up for free as a rolling shell when the other bits are gone.

Some of the mods on the car

Brake lights are german spec so no rear reverse light £30

HK engine, new genuine vw cambelt and waterpump less than 100 miles ago. about 80 thousand miles off the top of my head £80 without the carb

Coupe s alloys (matt black-no centre caps) with legal tyres £100

Weber 32/34 dtmr carb conversion £60

GED Brace bar £30

Full gt airbox including grill induction plate £40

Recaro sr mitsubishi evo 4 seats in very good condition (some bolster wear on drivers side) with standard frames £300

Brand new nos mk3 vw sump and gasket £50

Pair mk3 door handles £20

Theres plenty more but i cant think atm, will update as I'm going through all of my parts

Choke handle?

Choke handle?

Would like to sell it with the carb, thanks

how much is engine with carb and will it fit in a mk2f/mk3 breadvan?

how much is engine with carb and will it fit in a mk2f/mk3 breadvan?

Yes it will fit and its £60 for the carb and £80 for the engine so £140 :-)

Edited 27 August, 201214 yr by shaun_89

what engine was the webber on could really do with this

The weber is a 32/34 dtrm on a hk 1300 solid lifter engine.

The weber will come with the correct manual choke lever for the dash. I can sell it with the inlet attatched for collection as it would make it a bolt on mod but for postage it would it would have to be just the carb and adapter plate for weight reason.

Aup mate, would the Weber fit a standard 1l? Really interested in this so please let me know :)

It would fit, however is a bit overkill and would need re-jetting for a 1043cc, you should have the hk engine aswell

I would have the hk aswell but as I'm a student and paying 2k for fully comp on my 1043 I can't afford a bigger engine :( one day though haha. Seems like you have a bit of interest in the hk anyway will deffinately have the weber though, can collect too as I'm only an hour or so away

youre inbox is full cant reply to you

what engine was the webber on could really do with this

The weber is a 32/34 dtrm on a hk 1300 solid lifter engine.

The weber will come with the correct manual choke lever for the dash. I can sell it with the inlet attatched for collection as it would make it a bolt on mod but for postage it would it would have to be just the carb and adapter plate for weight reason.

Aup mate, would the Weber fit a standard 1l? Really interested in this so please let me know :)

It would fit, however is a bit overkill and would need re-jetting for a 1043cc, you should have the hk engine aswell

I would have the hk aswell but as I'm a student and paying 2k for fully comp on my 1043 I can't afford a bigger engine :( one day though haha. Seems like you have a bit of interest in the hk anyway will deffinately have the weber though, can collect too as I'm only an hour or so away

youre inbox is full cant reply to you

Hadn't even realised man, cleared some space so message away! :)

If you can gimme a paypal address and postage price. I will pay u for it NOW. Or text me your paypal. 07747374173.

Do you still have the Weber 32/34 dtmr carb conversion for £60? If so do you know if its a straight job to fit ( if it fits ) onto my 2G engine (mrk2 coupe s G REG) ? If it is I will take it NOW. Everything I need with it to bolt on and go including choke cable etc.

I've still got the carb conversion, I've got everything you should need. Its already jetted for a 1272cc so should work straight away

I'm going to be breaking my mk2 coupe s 'b34 tyg' is the plate. Its a shame as its comet blue but its been too neglewcted by previous owners for me to economically restore it.

Its all available, will get pics asap on request.

The shell is pretty solid underneath, just the rear valance is rusty. Will be offered up for free as a rolling shell when the other bits are gone.

Some of the mods on the car

Brake lights are german spec so no rear reverse light £30

HK engine, new genuine vw cambelt and waterpump less than 100 miles ago. about 80 thousand miles off the top of my head £80 without the carb

Coupe s alloys (matt black-no centre caps) with legal tyres £100

Weber 32/34 dtmr carb conversion £60

GED Brace bar £30

Full gt airbox including grill induction plate £40

Recaro sr mitsubishi evo 4 seats in very good condition (some bolster wear on drivers side) with standard frames £300

Brand new nos mk3 vw sump and gasket £50

Pair mk3 door handles £20

Theres plenty more but i cant think atm, will update as I'm going through all of my parts

How about the deposit then dude? Will need your paypal address :) cheers

Weber gone?

How about the deposit then dude? Will need your paypal address :) cheers

Carb prov sold (deposit taken)

Hi mate, I'll take the hazard switch, the rear badges (vw logo, volkswagen and polo), the seat runner guides and if you have the interior blanking plates for the mirrors drop me a pm with a price non posted as will collect when I come for the carb

Edit: could I also get a photo of the GED brace bar positioned on the car and what it looks like, brother is interested in it cheers

Edited 8 September, 201214 yr by VeeDub94

Hi mate, I'll take the hazard switch, the rear badges (vw logo, volkswagen and polo), the seat runner guides and if you have the interior blanking plates for the mirrors drop me a pm with a price non posted as will collect when I come for the carb

Edit: could I also get a photo of the GED brace bar positioned on the car and what it looks like, brother is interested in it cheers

Hi, when do you want the carb? I've got the carb with me in cannock but as I'm not back at tge car i woldnt be able to get any other parts for two weeks. I've got the hazard switcg and badges (will check) , i dont have the interior blanking plates and I'm not sure what you mean about the runner guides?

I dont have any pics of the brace bar fitted but its just like any othet, i have some arb blocks to go with it aswell

Hi mate, I'll take the hazard switch, the rear badges (vw logo, volkswagen and polo), the seat runner guides and if you have the interior blanking plates for the mirrors drop me a pm with a price non posted as will collect when I come for the carb

Edit: could I also get a photo of the GED brace bar positioned on the car and what it looks like, brother is interested in it cheers

Hi, when do you want the carb? I've got the carb with me in cannock but as I'm not back at tge car i woldnt be able to get any other parts for two weeks. I've got the hazard switcg and badges (will check) , i dont have the interior blanking plates and I'm not sure what you mean about the runner guides?

I dont have any pics of the brace bar fitted but its just like any othet, i have some arb blocks to go with it aswell

Drop me a message dude, will be easier to discuss collection. And ah no worries mate, needed them asap, if i dont have them in two week time then I will have them off you :) And no worries, they're really hard to come by, and yeah cant really explain too well. But when you pop the front seats forward and look toward the runners, they are the black parts, if it makes any sense

And ahh okay, will have to sort out about that in the next two weeks

Have you got the ignition system mate?

Has it got coupe s clocks?

If so how much posted?

Thanks

Have you got the ignition system mate?

Yes i do, its been converted to accuspark

Has it got coupe s clocks?

If so how much posted?

Thanks

Hi, they are 40 posted with the red stripe surrounding trim

was condition are the backing plates behind the front brake discs

Pm me, cheers

Edited 15 September, 201214 yr by pascoe92

Have you got the ignition system mate?

Yes i do, its been converted to accuspark

I'm not familiar with that?

is it a hydro head?

Hk is mechanical head. Accuspark replaces the ignition point. Had it on mine too.

I still want the bonnet!!!

Have you got the ignition system mate?

Yes i do, its been converted to accuspark

I'm not familiar with that?

is it a hydro head?

Its not compatable with any hydro cam if you were hoping to use the ignition to run bike carbs.

Thanks :)