Skip to content

Woudln't normally ask..

Featured Replies

  • Author

Supercharged thread?

The regarding the vac pot, the arm moves both ways. But now I am a little confused at to whether the actual distributor plate will have sufficient movement in each direction.

Eric, that would be dope, thanks

  • Replies 117
  • Views 3.9k
  • Created
  • Last Reply

Top Posters In This Topic

I'm gonna piss myself with laughter if everyone whos tried them didnt think to check that, i highly doubt it, but still. simple things just dont click with some, so i wouldnt be surprised!

Eric. If you want rid of it, let me know. Always good to have spares

Max, scanning would be cool. Or even the actual book/whatever. Would be great, thanx. I didn't ever read Tommo's build I don't think. Certainly read about the car though, Was it on here? And yeah, a wideband needed for sure!

Ok, i'll have a look at work tomorrow, its been ages since I looked at it.

He talks about the car in that "supercharger" thread.

wish youd shut up about work Max.

Eric. If you want rid of it, let me know. Always good to have spares

Max, scanning would be cool. Or even the actual book/whatever. Would be great, thanx. I didn't ever read Tommo's build I don't think. Certainly read about the car though, Was it on here? And yeah, a wideband needed for sure!

Ok, i'll have a look at work tomorrow, its been ages since I looked at it.

He talks about the car in that "supercharger" thread.

wish youd shut up about work Max.

:lol: sorry, i do like to brag about the fact i work at the UK's leading hydrogen fuel research company.

Si, this one;

http://www.clubpolo.co.uk/forum/index.php?showtopic=219594

I'm sure he says somewhere that he threw the carb on, started it up after sorting the ignition and made sure there was no detonation.

Can somebody tell me what size hole I need to drill to get the compression ration down to 8.5:1 please.

  • Author

Just found, and read it again. Yep, he said he didn't even bother re-jetting the carb. But then said he spent quite a while setting it up.

Can somebody tell me what size hole I need to drill to get the compression ration down to 8.5:1 please.

dont know what size exactly, but any jobber drill will see you right.

Just found, and read it again. Yep, he said he didn't even bother re-jetting the carb. But then said he spent quite a while setting it up.

oh dear. well have a look at what sort of MPG the R5T gets, and go from there.

drill 2.6mm mate, but use a 2.5mm, due to it wobbling with your handheld wilko drill

HTH

simon, you got a link to tommos thread? sounds pretty cool. been looking on the g40 forum and haven't found it yet!

From memory there were just bits and pieces of a build thread on a mini forum iirc. Not a huge amount of info, but a few pics of the manifold build, intercooler placement and a couple of other general pics. I have the links on an old computer that's buried god knows where.

I take it the diesel plan is now out of the question? i notice its in the classifieds

http://www.clubpolo.co.uk/forum/index.php?showtopic=300235

but it doesnt have any pictures - so heres the original advert from the person prankster got it from

http://www.clubpolo.co.uk/forum/index.php?...;hl=diesel+1398

The pump which comes with it along with the spare pistons was from my 1W engine (£40) which had not done many miles at all and was all good!

GLWS

looks like a good price

  • Author

Yep Kiz, not sure a Diesel is going to give me what I want from a car. I'll have a crack at a turbo and if it all goes tits, I'll have the 1.6 to fall back on. Providing I get that going :?:lol:

Thanks for the additional info Kiz, the engine is stored elsewhere and you providing pictures has saved my a journey. I'm guessing some of these comments and links to other posts are because you feel its overpriced. Fair point, it may be. However, considering the miles travelled to pick things up, the fact that the two halves alone don't make a working engine and the rarity of the thing in the first place I'm not prepared to sell myself short. £400 was set as a price as I'm not really sure what it's 'worth'. Hence the 'all offers considered' comment. I don't expect to get that price for it, everyone on here tends to make offers rather than pay full price for almost anything. Additionally I'm not selling it for exactly what I paid for it to account for time and money I spent collecting parts.

If someone really wants a 1W and can find one for cheaper, then they should snap it up

This thread isn't about how much things are being sold for, so we'll leave it at that and get back on topic

Edited by prankstar2003

Crank is ~£300 from VW last time I got a quote, oil squirters new are cheap too. I'd use the PY block and do it this way if you ever wanted to build a 1W in the future after selling this one.

  • Author

Thanks for the info yoof

Create an account or sign in to comment

Recently Browsing 0

  • No registered users viewing this page.

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.