Skip to content

Maybe a stupid question but i need to ask

Featured Replies

As above this might be a stupid question and i hope i dont get to much stick for this.

I want to lower my polo and stick on banded steelies.

The thing is obviously i would have to get spacers but the main thing I'm asking is if i lower it as much as everybody else does then would the car bottom out and become undrivable?

I'm asking as its my daily thanks in advance Thomas

  • Replies 19
  • Views 841
  • Created
  • Last Reply

Top Posters In This Topic

60/40 is common for daily use as it'll allow you over speed bumps and so on without any real fear of knocking the exhaust

you can get a spring shock kit on ebay for about £120 which will do the job, won't be very refined but you get what you pay for

  • Author

60/40 is common for daily use as it'll allow you over speed bumps and so on without any real fear of knocking the exhaust

you can get a spring shock kit on ebay for about £120 which will do the job, won't be very refined but you get what you pay for

Thanks i must admit i dont have any speed bumps to go over.

I'm also going for a more fruity exhaust.

I like the look of these cars when they are done like that. Thanks again

I'm down around 100mm and have no problems... Speeds bumps are a no though :lol:

Edit: just realised what you said... I'm not on banded steels so erm yeah sorry haha

  • Author

I'm down around 100mm and have no problems... Speeds bumps are a no though :lol:

Blimey you must be getting a shed load of gravel rash :D

To be fair I don't really scrape anywhere, tend to plan my routes around bumps etc. Only beached it once :lol: and dragged a stick/branch along underneath for a bit but nothing major

  • Author

oh right i must admit I've never had a car that i can do so much too. I want to keep it too so money isnt so much of an issue just saving up money is :rofl:

do your research before you mod so you can avoid trouble spots and bad products

  • Author

THanks I must adi have been doing my homework but it gives me a headache just going over again and again.

My 6n2 is on banded steels and wound down a bit on coilies, no issues whatsoever if I wind it down more then I might find a few. Scraping is all part of the fun though, my mk3 is a bitch for it :lol:

. Scraping is all part of the fun though,

The shaking of heads from pensioners are the looks I enjoy the most :lol:

. Scraping is all part of the fun though,

The shaking of heads from pensioners are the looks I enjoy the most :lol:

8-)

. Scraping is all part of the fun though,

The shaking of heads from pensioners are the looks I enjoy the most :lol:
8-)

Damn right.

:lol:

  • 2 weeks later...

a 60/40 kit would do it and some 14x7/8 banded steels would look awesome! might have to run 5mm spacers on the front depending on what brakes you have

Not sure why you would need to run spacers?

14's would be better than 13's simply for the fact that most early polo's on 13's have half arsed lowering meaning big arch gap and shitty roller skate stance. You wouldn't need to go as low on 14's to get it sitting nice so it would be more suitable as a daily driver

Not sure why you would need to run spacers?

14's would be better than 13's simply for the fact that most early polo's on 13's have half arsed lowering meaning big arch gap and shitty roller skate stance. You wouldn't need to go as low on 14's to get it sitting nice so it would be more suitable as a daily driver

True that.

Also don't see why you would need spacers, just find some or get some banded that have sensible offsets and you'll be fine.

I'm a fan of 15's on early Polos though!

The beauty of banded steels Is you can have them made to fit perfectly... just a shame no one seems to bother :lol:

  • Author

a 60/40 kit would do it and some 14x7/8 banded steels would look awesome! might have to run 5mm spacers on the front depending on what brakes you have

Thanks i think a 60/40 kit might be the way to go.thanks again Thomas

  • Author

Not sure why you would need to run spacers?

14's would be better than 13's simply for the fact that most early polo's on 13's have half arsed lowering meaning big arch gap and shitty roller skate stance. You wouldn't need to go as low on 14's to get it sitting nice so it would be more suitable as a daily driver

Thanks i really like having 13s on my car and hopefully 13s will be ok thanks again Thomas

The beauty of banded steels Is you can have them made to fit perfectly... just a shame no one seems to bother :lol:

:lol:

Create an account or sign in to comment

Recently Browsing 0

  • No registered users viewing this page.

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.