Skip to content

170 bhp supercharged engine - parting out

Featured Replies

Time to say goodbye to my 170bhp supercharged lump. No interest in the full conversion, so it's getting parted out. Plus a few other bits and pieces up for sale.

I'm moving house and spending less time on the cars due to my new job, so rather than it all just sit on the shelf, it's time the bits started helping others go faster (or lower - if that's your bag!)

Most of the parts have reciepts.

Work was done on head/block 800 miles ago.

Ported/flowed head, new valve and guides, gaskets, seals at engine rebuild, painted silver
Thinner metal headgasket - £350
Rebuilt block - new oil pump, new rings, all bottom end shells, seals, gaskets etc.
Block painted red - £450
Schrick 272 Camshaft with vernier pulley. - £220 - prov. sold
GT manifold port matched to head - £70
51mm throttle body - £200
G60 green injectors - £50
Jabba induction kit and heatshield £100
PSD 4 branch exhaust manifold - £350
Stage 4 full blend charger - £500 (G-lader serviced June 2012, oil seals and apex seals with fresh klubber grease and new gates belt. done 10k)
Sub 60k Jabba R1 ported charger - Rebuilt and run in with 600 miles - £550
65mm PSD Alloy Toothed Belts - £200 - prov. sold
Custom mapped at PSD map, 170bhp. - £100
Alternator £80 - NOS VAG, done 4k
Starter Motor £25
ECU £100
Engine Loom £100
Dizzy £50
PSD Rear SS Silencer - £150
PSD SS Midbox Silencer & Pipe - £100
FK Coilovers - stripped back, primed and painted black - £220 (think a rear shocker is goosed)
KW -60mm Springs - £100
HnR -60mm Rear Springs - £50
Koni Rear Shocks - £60

The supercharged lump on the rollers
IMG_0809.mp4 Video by white_polo | Photobucket rr printput http://i134.photobucket.com/albums/q104/winter_snowball/2011-05-15184118.jpg

rebuilt supercharged engine
9650_10151554733636343_266305859_n.jpg
64404_10151560723101343_1774456165_n.jpg
17418_10151560723941343_1804647495_n.jpg
902482_10151585307261343_1750572915_o.jp
WP_000831_zpsb5d3e79f.jpg

62k charger

http://s16.photobucket.com/user/yousafn/library/62k_charger?sort=3&page=1

  • Replies 25
  • Views 1.9k
  • Created
  • Last Reply

Top Posters In This Topic

rocker cover posted?

Where about's are you dude?

crawley RH11

thanks

  • Author

I'm in Central Manchester. Rocker cover is not for sale.

what clutch is on it doooood?

  • Author

helix paddle, but not for sale unless it goes as a full conversion, which is unlikely as I have a buyer for the cam and toothies and everything's coming apart on Sunday.

I do have a CG 3 paddle clutch I would be prepared to part with however

How much for full conversion?! Wish I saw this sooner!!!

  • Author

2k

Injectors any issues? posted to york??

Cheers.

  • Author

No issues, but haven't been tested for a while. I'd always suggest getting them ultrasonically cleaned for piece of mind. PPP can do this for you.

Postage would be about 8 quid by courier, cheaper by PO but I rarely get the time to get to one

Ahh damn, how much forr the 3 paddle? Thatl be harsh as fuck haha

Intercooler and pipework?

  • Author

125 for 3 paddle. My helix's are 4 paddles, and they are fine. I've no issue with daily driving and paddle clutches although there is alot of non-love for them. You've seen my legs too, hardly tree-trunks haha!

Intercooler can be had for 80, no use to me on the other motors. Piping not for sale separately unfortunately (as I'm keeping the majority of it for my k03 mk2 olop build) although let me know what piping you do need and I'll have a dig around, as I have some spares.

Intercooler can be had for 80, no use to me on the other motors. Piping not for sale separately unfortunately (as I'm keeping the majority of it for my k03 mk2 olop build) although let me know what piping you do need and I'll have a dig around, as I have some spares.

What intercooler is it? size? whats it off? also you got any seats?

  • Author

540mm x 140mm x 65mm

was brand new fella when i fitted it to the golf, think its a toyo sport.

  • 1 month later...
  • Author

cam, vernier and toothies now with their new owner

  • 2 weeks later...

Sorry hijack your thread old boy but you don't have a G40 speedo for sale so you?

  • 3 weeks later...

hello mate, do you still have the psd center and rear section? if so i'll be interested in having them off of you. jez

  • 3 weeks later...

G60 injectors still available?

Interested in injectors dude still have them ?

Do you still have the ecu mate?

  • 3 weeks later...
  • Author

Bump.

Injectors sold to spacebar.

10% off everything for the next 2 weeks

Still got the ecu ( got a couple)

£200 for the TB? step awake from the crackpipe lol.

ECU Still for sale??

Create an account or sign in to comment

Recently Browsing 0

  • No registered users viewing this page.

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.