I'm after the two plugs you would plug a fault code reader into on a mk2f GT or g40

Thanks

22 1J0972702 flat contact housing / connecting part / for diagnosis plug / F >> 80-P-500 000 2 pin / 3F,AAU,AAV, PY

(22) 443972577E flat contact housing / connecting part / for diagnosis plug / F 80-R-000 001>> 2 pin white / 3F,AAV,AAU, PY

(22) 443972580 flat contact housing / connecting part / for diagnosis plug / F 80-R-000 001>> 2 pin black / 3F,AAV,AAU, PY

Thanks, but any idea where you can buy them from?

Do you mean this? http://www.amazon.co.uk/Vag-com-Scanner-Adapter-Connector-Cable/dp/B00SV3GGLA/ref=sr_1_1?ie=UTF8&qid=1450026543&sr=8-1&keywords=VW+2%2B2+OBD+adaptor

That is the one I bought and it works fine.

I've got that and a Vgate VS45 but as my car is a mk2 conversion I don't have the connectors to plug it in to.

These:

I was missing one of the plugs so I wired in the OBD plug as my main diagnostic port. I guess if you want the originals then you'll have to get them from someone who is breaking a car.

Reckon I've probably got some somewhere, would be the weekend before I could check. Can be picked up near to Loughborough during office hours.

Thanks for the offer but I've managed to wire a OBD2 connector straight in.

I'll close this then, if you need it opened again give one of us a shout.