Due to a change in direction with my Saloon I'm putting up for sale parts I no longer require.

All these parts are mounted on my 1.4 ABD engine and will fit 8v engines up to mk3 (mk2f).

- CBR600 CARBS & ACCESSORIES - £175 posted

1989 CBR600 carbs with Mild Steel manifold, Pipercross airbox/filter & various main jets, slow jets and needles. I couldn't get the carbs set up correctly, causing my engine to lean out. the Carbs will need a good clean, fresh seals and rebalancing, plus someone with the skill to tune them correctly for the engine. I couldn't find that somebody hence the sale.

/\ needles and mainjets

Omex Clubman rev limiter with Launch control button - £80 posted

New and unused, has been mounted to the car. just no box or instructions (instructions can be found online)

Ebay Special 4-2-1 manifold, Heat wrapped - £100 posted

Newman 272 camshaft - £150 posted

My intention is to no longer remain naturally aspirated so this cam wont have much use for me. Unfortunately no photos, the cam has covered +/- 2500 miles. It is agressive, with lumpy idle. A loss of bottom end is more than made up for with the increase in overall torque and power up top. Fits right in the 1.4 ABD head however smaller engine sizes may have clearance issues. Someone with more information could help here?

2" Exhaust system - £150 posted

This is a home made 2" exhaust system, with a cherry bomb style back box leading to a Cafe racer megaphone 2.5" tip. The welding is pretty shit but it does not blow, in general it sits nice on the car. It sounds fantastic however probably isn't legal. It turns heads for sure. Heat wrapped. Shortening the tailpipe should allow it to fit a coupe/breadvan. ALSO! the mounts were modified on my car, so a mounting strap would need to be added.

off the car

on the car, the link below is the sound.

https://www.youtube.com/watch?v=QC9Ek2LzrBc

finally, wheels.

Fondmetal 3000? wheels with Toyo Proxes tr1 tyres - £300 posted

I love these wheels, but they're just too big. 15x7j, on 215/45/15 proxes. Would be well suited for a later model polo or something heavier like a golf/jetta. Plenty of tread, plenty of bling. Tyre writing can be removed.

SOOOOO that is everything. Feel free to make me an offer. Any parts collected obviously can be reduced, Address under request, send me a message for any parts you are interested in.

Pm'd about omex rev limiter

OMEX REV LIMITER AND NEWMAN CAMSHAFT PROVISIONALLY SOLD.

The exhaust still available?

Also the manifold?

Exhaust manifold and Camshaft is sold. Custom exhaust system is still available though.

Pm'd

Carbs and manifold still for sale if so what price ?

yeah the carbs and mani are still available, I'll go as low as £150 posted. PM me if interested.