Skip to content

Power steering, and other faults

Featured Replies

Evening all, I have recently purchased a 2005 VW polo 1.4 Litre, the power steering does not work, the dashboard light is permanently lit, I have the following information after having the codes read, 

Address 09: Cent. Elect. Labels:. 6Qx-937-049-C.lbl Part No: 6Q1 937 049 D Component: 00BK BN-SG. 1S34 Coding: 25742 Shop #: WSC 00788 VCID: 3C76BCD92CDE42AAC1-5140 1 Fault Found: 01309 - Power Steering Control Module (J500) 49-00 - No Communications

 

So what does this mean, where is the Power Steering control module located ???

 

The next fault is as follows

 

00562 - Sensor for Oil Level/Temperature (G266) 30-00 - Open or Short to Plus

 

What do I need to change / replace to clear this fault

 

The next , and final fault is as follows.

 

1 Fault Found: 17809 - EGR Valve (N18) P1401 - 35-00 - Short to Ground Readiness: 1010 0101

 

So can anyone advise what I need to do in order to rectify this fault please,

 

Any help and guidance is very much appreciated,

 

Thankyou

 

Sayers

  • Replies 9
  • Views 38.1k
  • Created
  • Last Reply

Top Posters In This Topic

Posted Images

First Welcome to the forum.

 

The power steering pump unit is below the passenger side headlight, I would start by checking the fuses #7 on the fusebox inside the car and the 50 amp fuse #3 or #5 on the battery fuse carrier, that fuse is the flat metal strip type, so have a good close look at it as they often fracture 1103237023_Batteryboxfuses.thumb.JPG.79bdab37399b1b9f239a79072aa8ea45.JPG

 

The other fault codes, I would delete them and re-scan in a weeks time to see if they have returned as they might of been stored a long time ago, however the fuse#7 for the power steering is also used for the oil level/temp sensor, so that might be two faults caused by one fuse if your lucky 

  • Author

That is fantastic, Thankyou for your guidance, much appreciated,

 

Is the Power Steering module part of the pump assembly ??,

 

Can you show me a fuse box layout please to enable me to identify fuse No 7 easily,

 

 

The Pump and control module are all in the one unit #4 in this picture

541369826_9N1PowerSteeringLocations.thumb.jpg.16b55c7c233c855ba6aa7920d1995ad9.jpg

352834272_9N1InteriorFusebox.thumb.jpg.e85e7b8ea4aaff1a5ff9cb19f999ea4c.jpg488949980_9N1BatteryFusestoMay05.thumb.jpg.da8d5937e56544ecde362074e16f5d3c.jpg

On this layout it's fuse S164

 

1443174317_9N1BatteryFusesMay05toNov05.thumb.jpg.6fe7fe8194103d44b2975143d7658712.jpg

 

On this layout it's fuse S177

 

  • Author

Thankyou for your help.

 

Regards

  • Author

Update time, fuse F7 had blown, so it got replaced, immediately blew again, disconnected the pump, put in a new fuse, blew again, So looked at what else was on the same circuit, identified the EGR valve and a crankcase heater breather thing, unplugged the breather, Fuse no longer blows, 

 

So 

 

What is the proper name for the crankcase breather thingy, or better still what is the right part number, would like to get one from a good breaker or ebay, 

 

My car is a 2005 1,4 16V

 

Cheers

 

Sayers

  • Author

hmm , I cant see the crankcase heater breather thing, it has an electrical connection and an element inside it ???

  • Author

I have found the VIN number, WVWZZZ9NZ6Y174762   , but where do i get the engine type from ???

If you look at the picture on that link #3 is the connection for the heater element.

 

The engine code is the first three letters of the engine serial number on the V5 logbook

Create an account or sign in to comment

Recently Browsing 0

  • No registered users viewing this page.

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.