Skip to content

6N2 1.9TDi ??

Featured Replies

I've got a 1.4 16v 6N2 and I'm lookin to change it to TDi, i was wondering if there was a 1.9 TDI model made ??

i know there was a 1.4 SDi, but not sure if was a 1.9 !!

if there wernt then ill look at golf GT TDi engines with 6 speed boxes :D

Thanks Andy

  • Replies 15
  • Views 4k
  • Created
  • Last Reply

Top Posters In This Topic

Nope, didn't exist in the 6N2. Just the painfully slow and unrefined 1.9 SDI along with the 1.4 TDI's

Edited by Mouse_GTI

  • Author

right thanks :D

next Question, did the MK4 golf 1.9 TDI or GT TDI, com with a 6 speed box ??

Yeah some did

  • Author

next question, its a very long shot but has anyone got a mk4 golf 1.9 GT TDI (6 speed), with rear end damage (Write off) ?? :D

If you are planning what I think you are planning it won't work without a LOT of time and effort.

The 1.9 SDIs use a hybrid box which mates up a 085 (Polo) box to a tall block (Golf) engine. You'll need to look at people doing 1.8T conversions, as that is the work you will need to do, if not more due to the extra weight of the diesel engine, and the fuel lines/fuel tank etc all needing changing... :(

  • Author

do u know what BHP the GT TDI's with the 6 speed box come in ??

do u know what BHP the GT TDI's with the 6 speed box come in ??

130 and 150 IIRC

  • Author

yeah i know it is going to be a lot of work, that why in lookin for a compleat car, i am planing to strip my polo rite back to the chassis, every thing off it and out of it, I've got my own workshop with all the tools ill need to hand, and i have a m8 that workin in Parts at VW and I'm gd m8's with a couple of guys that have worked for VW from the age of 16 There both now 52 ! and I've done a couple of engine changes, 1.4 to 1.8 20vt, 1.4 petrol to 1.4 TDI, and a few bmw's we even made a 325 fit into a 316 !! :D

so yeah i am planing for a big and long project as soon as my mk2 golf GTi is finished, its all go for the 1.9 GT TDI 6 speed 6N2 Po-Low :D

Edited by sum1's dad

That's fine then, as long as you know what you are letting yourself in for :D

Should be a good project! Remapped and a decent turbo-back exhaust you could be looking at 200 brake, 6 speeds, and an unprintable torque figure :lol:

  • Author

how about whist the engine is out, put a nice BIG stage 3 Hybrid turbo on it and fit a custom ECU, 3.5" turbo back S.S exhaust, and do a full engine rebuild fitting all the best parts, with ported and polished head, biggest FMIC i can fit behind the bumper, lightened flywheel, triple layer race clutch to take the crazy amount to torque going through it, and then get my m8 to do a full custom rebuild on the gearbox, so that don't blow up, and then with a set custom made drive shafts, and a BIG brake kit, then its time for the remap !! :D

how about whist the engine is out, put a nice BIG stage 3 Hybrid turbo on it and fit a custom ECU, 3.5" turbo back S.S exhaust, and do a full engine rebuild fitting all the best parts, with ported and polished head, biggest FMIC i can fit behind the bumper, lightened flywheel, triple layer race clutch to take the crazy amount to torque going through it, and then get my m8 to do a full custom rebuild on the gearbox, so that don't blow up, and then with a set custom made drive shafts, and a BIG brake kit, then its time for the remap !! :D

Then you will be about 5 grand out of pocket? :lol:

I'd rather just buy a Golf GTTDI Anni.

there is one that has already been done on piston heads.

click

would be a nice project, if you were going to do it, start with a 1.tdi polo, and if you're lookin for a mk4 golf tdi to break you will be paying about £1500 for all the bits.

I know where there is one for sale, on auction, but wouldn't be able to get hold of it, a really nice 150bhp hit square in the back.

My 1.9 Sdi doesnt seem all that bad. Ok so its no rolls but its pretty good on the motorway and cheap on the fuel.

seems like you're making life diffcult by starting with a petrol. starting with a 1.4tdi would mean you allready have diesel spec tank and lines!

  • Author

Dave-6N2, yeah maybe that much but oh well will have a one off car at end of it ! :D and i prefer the polo ! :D

Tom, yeah i was thinkin it wood be bout that price, but then I've already got most the parts there, just got to make them fit into a smaller chassis ! :D

pettsy, yeah it wood, but thats what makes it more fun :D love the challenge :D

Create an account or sign in to comment

Recently Browsing 0

  • No registered users viewing this page.

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.