Skip to content

Rolling Road Day Results!

Featured Replies

Hi Guys & Girls,

Firstly thanks to everyone who came, turnout was about 50% of what was expected although still managed to run everyone who wanted a go. Aldon boss asked me to pass on his thanks for being an excellent club, who where never any hassle :lol: (probably as there wasn't alcahol involved at this point) :-D

No real huge BHP cars there, ones worth noting on the day are turbodailys 230,000mile G40 still pushing 160bhp :shock: :-D and sam's seat terra putting out 152lbft.... apparently :lol: Unfortunately Danny fell short of his expected 200BHP target, always next year I suppose :lol:

Untitled-1-1.jpg

Cheers

Yoof

  • Replies 53
  • Views 4.8k
  • Created
  • Last Reply

Top Posters In This Topic

Yoof was mine a secret mk4? lol

the 328i auto was 175ish bhp IIRC... 192 stock off the top of my head...

the other mk4 didnt run due to problems with offside wheel/suspension

What did P10GOT do to get 77BHP?

Thats pretty good for a 1.4 8v...When standard is 60bhp

Edited by gavin89

Nice result for you Yoof, any pictures of your beast. Is it in your old Gt shell?

aye yoof's is impressive

wuda thought karls GT wuda got a better result.....

what he blame it on...misfire lol

@ ross.....from what digging av done...its in his red GT shell, what the black g40 he had was for am guessin lol

Edited by neil_dubgt

Damn, I was seriously shooting for 200bhp but I think my rocker gasket was leaking and that had serious consequences on the power.

  • Author

Shame that danny :lol:

Was aiming for alot more than what i got- was wheelspinning on the rollers due to tacking and camber being out (my own fault) hence me & andy trying to get more weight on the front, still if you can wheelspin in 5th and still make over 200bhp and 200lbft, it's not all bad :lol:

we got a bunch of people to sit on the front of guys car when we had a club RR day in an attempt to stop the wheel spin... to no avail tho :( :lol:

some nice figures there!

Looks like I missed out on all the fun :(

congrats to coupegts75 and narrow lane, bit of a result there then. rocking the carb love! danny's the dark horse for 2009

Can I ask whats the spec of your car yoof?

Cracking result for my beastie yesterday am well chuffed, just need to see what the remap will bring...

Sam's results are proper strange because they used my rpm levels from the run just before, so its probably WAY out :-D

congrats to coupegts75 and narrow lane, bit of a result there then. rocking the carb love! danny's the dark horse for 2009

cheers man. was really surprised by the result tbh! weber dmtl ftw :)

also might I add, my weber setup doesn't have a GK manifold...

Edited by Narrow_Lane

Does your Mk2 feel quick Matt?

hey matt thats a result!! didn't even know you had done a conversion :? well done

Edited by max

lol cheers, the spec is in the mk2 gallery section

and yes toby it does :) altho a loose rear engine mount makes gear changes difficult to cope with haha

was a fun day, thanks for organising it

My goof put out 113 BHP, dunno bout torque, my sheets been put away somewhere

The bug got 73 BHP and i dunno bout torque onthat either

Yoof was mine a secret mk4? lol

the 328i auto was 175ish bhp IIRC... 192 stock off the top of my head...

the other mk4 didnt run due to problems with offside wheel/suspension

Yep my BM ran 175bhp and stock it should be 193bhp... I check what the torque was tomorrow as the sheet is in the car.

Sorry I couldn't stick around after the run I was late for a suit fitting.. :shock:

Hopefully next year the polo beast* should be there

(* definition of beast is open to discussion)

What did P10GOT do to get 77BHP?

Thats pretty good for a 1.4 8v...When standard is 60bhp

read his tech sheet and it was a full exhaust system and a viper induction kit mad isnt it to show such an increase

DSC04338.jpg

here's my graph 8-)

DSC04338.jpg

here's my graph 8-)

its the man with the amazing white valver *dribble* you were saying there is a full exhaust system on that 8v? does that include the manifold?

look at the torque on sams shitter!!!

Really enjoyed the day, was a good crack. Nice to meet some faces behind the names.

Decided to run the old Cadster & was well chuffed with the power output of her!!!! Looks like crap, but don't go too bad!!!!

Thanks to the organisers for this, especially Yoof who made it all run silky smooth!!!

i was a bit gutted that i didnt get to run due to me neglecting my polo !!

oh well i know it goes well enough , see what next year brings !!!

Was nice to meet a few people down the road from me , nice guys . thanks rich for letting me follow u there and back :)

you were saying there is a full exhaust system on that 8v? does that include the manifold?

yeah had a 4-2-1 manifold i think:)

Create an account or sign in to comment

Recently Browsing 0

  • No registered users viewing this page.

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.