14" Mk3 golf wheels, thinking of getting a set for my mk3 polo.. Anyone know if it's a straight fit?

I'd say without a doubt... I've got mk2 Golf wheels on my mk3 Polo... Also Corrado VR6 steels and that are a straight swap, so I'd assume they're typical VW 4x100 and will go on straight!!

These will fit as long as they are vw 4 stud 100 pcd.

Chris: I very much doubt you can fit raddo VR steelies to a 4 stud polo. As far as i'm aware are VR dubs are 5 stud 100 pcd.

Also Corrado VR6 steels and that are a straight swap,

Chris: I very much doubt you can fit raddo VR steelies to a 4 stud polo. As far as i'm aware are VR dubs are 5 stud 100 pcd.

beat me to it

the only Corrado that may have had steel wheels would be the infamous G60s

the wheels will bolt straight on

its the tyres you will need to worry about

Also Corrado VR6 steels and that are a straight swap,

Chris: I very much doubt you can fit raddo VR steelies to a 4 stud polo. As far as i'm aware are VR dubs are 5 stud 100 pcd.

beat me to it

the only Corrado that may have had steel wheels would be the infamous G60s

the wheels will bolt straight on

its the tyres you will need to worry about

How do you mean 'it's the tyres'?? I have 185/60R14's on my p-slots and I have found that sometimes the fronts rub on the inner wheel arches on full lock.. any suggestions as these have the same size tyres I think an I'm just about to bid on them :)

Well if they're rubbing, get low profiles..