Skip to content

Help i dont no what to do?

Featured Replies

iv collected a lot of polo parts now and I'm not shore what direction to head in weather to sell all my parts engines and mk3 shells or to install the engines in to the cars and sell them hole or mabe keep them? this is all due to mabe losing my unit we currently have 11 cars at our unit between me and a couple of m8's

here is my list

I have a G40 engine conversion with 95k miles on it witch had most of its work done buy the guys down at PSD by the last owner.

There is a rolling road plot with 158BHP but the last owner has it but do have the link to the thread on regional forum were the results are posted.

I also no how well this engine was looked after buy the previous owner!

The only things missing is the RAD

  • loom with fresh loom tape
  • ECU
  • full engine
  • G40 inlet Manifold
  • GT inlet Manifold
  • Brand Spanking New G40 alternator
  • gearbox has also done 175K but has been re-built by JP race 3k ago
  • G40 intercooler
  • blue silicone hose kit
  • The G40 charger has done less than 10K since full blend and is in good condition but has done 175K miles in total.
  • pitstop stand-alone supercharger oil kit
  • Engine Oil Cooler
  • PSD chip
  • 68mm pulley
  • Dewedged throttle body
  • PSD induction kit but cant find it at present but have plenty of other air filters
  • two full custom mk3 strait threw exhaust system one power flow the other unknown
  • two VW exhaust decats
  • Front upper alloy strut brace
  • GT steering rack
  • 2 front philj dampers
  • a full set of springs new
  • new G-lader front ARB blocks
  • G40 front brakes
  • pair of used drilled and vented G40 Disks good condition
  • GT engine and loom all needed to run engine
  • White mk3 cl shell 90k good condition
  • one full mk3 GT interior
  • a couple of sets of GT/G40 arches
I also have my daily mk3 GT 111k miles Capri Green loads of MOT and TAX body work OK But dings in the door and dent in the boot lid

Mods:

full custom strait threw exhaust system

piper cross induction Kit

I now just want to buy a Good condition G40 all ready complete

cheers

andy

Edited by cheddarcheese

  • Replies 17
  • Views 1.3k
  • Created
  • Last Reply

Top Posters In This Topic

Out of curiousity m8y if you decided on selling up, what would a ball park figure be on the g40 as a whole or just the engione and gearbox please ? I'm interested in doing a g40 conversion into my 6N valver within the next year or so thats all, thanks

Tom

hey matey, if your willing to sell afew bits off that list, i'll have em for a good price. Interested in:

stand alone s/charger oil kit

arb blocks

PSD chip

engine oil cooler

Edited by vwmk3jon

I'm intrested in the stand alone oil kit too, if you do decide to sell up please pm me before you sell it.

i'd take the alternator if its a proper bosch.

  • Author

Not helping guys should i build a G40 or sell as parts?

Due to the average of the G40 engine you have, my option would be to find a nice clean shell for it. I mean perfect.

Get the engine ready to plonk in and then do it.

Get rid of all the other stuff you have.

G40 engines are hard to find. Also work at pitstop seems to have stopped and so the parts and work that you have had from pitstop you would not get back.

Get the G40 in a minter shell and sell the rest. So what if the car is not a genuine G40....if you are driving it and it feels and drives just as a G40 would then what else matters??

I think thats your best bet and what i would do.

Good luck!!

Edited by demolover

go through and write down what you think each part is worth, then see if its worth selling all the parts! thats the only way you will know tbh

  • Author
Due to the low miles of the G40 engine you have, my option would be to find a nice clean shell for it. I mean perfect.

Get the engine ready to plonk in and then do it.

Get rid of all the other stuff you have.

G40 engines with low milage are hard to find. Also work at pitstop seems to have stopped and so the parts and work that you have had from pitstop you would not get back.

Get the G40 in a minter shell and sell the rest. So what if the car is not a genuine G40....if you are driving it and it feels and drives just as a G40 would then what else matters??

I think thats your best bet and what i would do.

Good luck!!

Thats really what I want to do but my GT daily shell is a mess i don't clean it its that much of a mess nice colour but i am a perfectionist!

But I Cant afford a mint shell!

How much i think ill get if i put my gt engine in my spare white shell arches and stuff all nice a tidy body work ok got no dents! then sell that to fund a clean nice shell!

Edited by cheddarcheese

mint shells aren't hard to come buy

I am watching one on ebay at present just cos I like the colour

Only needs to be a 1.0litre with fucked engine

Plenty on ebay

Just sell everything else you have to fund the G40 engine into a mint shell. A mint shell can cost very little if you look hard enough.

Don't let go of a G40 engine as i doubt you will ever see one again.

Whack the engine in a mk2 and get scared!! :-)

Edited by demolover

as redg40 said jus keep an eye on ebay n buy a mint condition 1.0litre for next to nothing u can strip that for extra bits n bobs to sell then throw on what u want sell the rest then sell perhaps like u say make up a gt of that white shell n sell it u'll probs sort urserlf a mint condition high spec G n have more cash left over than when u started!

  • Author
Just sell everything else you have to fund the G40 engine into a mint shell. A mint shell can cost very little if you look hard enough.

Don't let go of a low miler G40 engine as i doubt you will ever see one again.

Whack the engine in a mk2 and get scared!! :-)

I Dont want to let go of the engine i love it its been so well looked after i payed over a grand for it last year!

and if i could find a mint mk2 coupe shell i would stick it in that as there 3inchs shorter and stronger than a mk3 then i would berg cup and 8point roll cage subframe some custom collies o god I'm dreaming!

iv all ready got the gt engine in the white shell just need to wire and connect pips then do the fual pump and bang its running again i hope! might go do it now! on my own in the cold!

Edited by cheddarcheese

GT G40

Look at the link above. I love the mk2 G40 and i would love to build one with the same colours and body as that.

Think you should do a mk2 coupe G40. With standard looking wheels a pure sleeper.

8-)

Don't get it working in a grim shell. Sell everything else.

DO IT.

DO NOT SELL THE ENGINE. You would only regret it.

  • Author

s2gtg40endurancecar.jpg

hmm i could easy replicate this i have the fibre glass or carbon fibre skills to make it! dont like the back bumper tho

btw I'm off to wire and get running the gt engine in my white shell to get that sold!

Edited by cheddarcheese

Agreed on the rear bumper. Don't like the cut outs but you know what i meant.

Get the GT sold. ASAP.

  • Author

just come back from the unit the white polo is all wired up just got to get my GT fuel rail at my other unit and i can try and start the engine also need to attach arches! and i installed half the GT interior tonight.

how much u think a white 1.3cl 90kmiles to full GT conversion be worth?

Edited by cheddarcheese

depends on condish of the shell and running gear and what the rate of "scene tax" is this week.

at a guess 600-900.

Create an account or sign in to comment

Recently Browsing 0

  • No registered users viewing this page.

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.