Skip to content

Got a badboy

Featured Replies

Ok so after a month or two of looking i finally got a polo.

1997 CL 1.4

it has around 49 k already on the clock. fsh, tax and mot all the other bits n bobs it should have.

just thought id share with you lot seeing as this forum is pretty helpful and I'm getting some ideas with what i want to do to it.

anybody have any suggestions what i could start by looking at doing to it ?

post-15730-1204286682.jpg

post-15730-1204286750.jpg

Edited by b-random

  • Replies 43
  • Views 2.8k
  • Created
  • Last Reply

Top Posters In This Topic

Posted Images

Nice clean looking motor mate.

Everyone will say it needs slammed on its arse first! :lol:

Nice little car.

Cheapy stuff to do for an instant change. Remove the bump strips and the rear badges (leave the VW badge in centre obviously), change the front indicators to clear ones and the side repeaters to clear or whatever and get some new rear lights. I think that all red mk5 lights would look awesome with that colour.

Then when that is done get it on its bottom with some philJ coilies. Insurance permitting of course ;)

Best bang for your buck if you ask me!! :-)

All the best

Barney

Yeah you know, theirs also a bit of slack on the clutch and throttle pedals. like wobblyness before you actually reach accelarating or supressing the clutch? is this something i just need to do by tightening them ? can this be done as i've never seen or tryed or had a car before to notice this type of problem

^badgless grille too, but keep away from mk5 rear looks shite imo lol only work good on red cars IMO...

go for something like hellas can pick em up cheaper and theyll fit to you are car straight away too.... but other than that, what he said lol

badgless grill, clear indicators, side repeater, mk5 rear lights, take bump strips off, de badge rear, nice wheels n lower lol

get some tinting spray, i have the same colour but its a 3door one, badgeless grill, or black badge, clear indicators n repeaters, remove the rub strips if you want too, (there just glued on, no filling required) maybe colour code your handles, then if funds allow and if its conveniant lower it, and set of nice rims.

got my eye on them borbet A's but would they be too big ? any advice would be good cheers

depend on what look u want, obviously the bigger wheels the less low it will be...

i think borbet a's only come in 16 and would look too big.

probably go for some nice 14's or 15's maybe 13's but the look abit small most of the time.

i would try go as low as i could with them on before its 2 much. but out of all other alloys i've been checking out they are what id preferably be going for once iv saved enough to afford them.

Borbet A's come in 15" and 14" but they are rare in these sizes.

Mk5 rear lights are a little marmite but i think smoked lights will just look tacky on this car and i think that Mk5 rear lights would look good but its all down to personal taste.

De-badge grill of course. Get that as well.

Don't get 16" borbets as i think they look too big. 14" or 15" is your best option regards wheel sizes. G60 steels would be a nice cheap option until you had some more money for something trick!!

I know that a lot of people use them but also its difficult to ignore how good they look on a low mk4.

:-)

Edited by demolover

all about the unique look. thats why i wanted to go for something different but other people have told me they would look to big. anyone seen the 14 or 15" about before in the borbet a's?

Yeah...... me!!

There was some 14" ones for sale on here not so long back.

16" will make it look like a horse drawn cart.

any sites or places i could look out for these? i know they only do 16" on dubmeister. would really be after a pair of 14's or 15's in borbet a's if possible they'd look sweet

www.ebay.de

item number: 180217465880

German ebay is your friend. You have to send the seller a message before you bid asking if they will post to the UK and how much they will charge for it. They may not want to post in which case keep looking.

I have bought wheels off there before.

Also English is readily spoken by the majority of German ebay users so don't use any dodgy translation site etc. Just ask in simple English and you will get a response.

Majority do not have paypal accounts as it has not quite caught on there yet. So you will have to pay for a bank transfer or relay about £10 -£20

Edited by demolover

lexus lights!! get them on and erm some spinning hub caps, sunstrip and a nice shopping list down the side lol

seriously....clear indicators, get rida the badge's, lower it abit and get some Borbet A's in 15s 8-)

firstly ad paint the badge on the front black lol

cheers people. anyone good with a photo shop and want to try put some borbet a's on their for me as an idea lol ?

Yeah you know, theirs also a bit of slack on the clutch and throttle pedals. like wobblyness before you actually reach accelarating or supressing the clutch? is this something i just need to do by tightening them ? can this be done as i've never seen or tryed or had a car before to notice this type of problem

got no reply to this question ? anyone know what this problem is. ??? help

Yeah you know, theirs also a bit of slack on the clutch and throttle pedals. like wobblyness before you actually reach accelarating or supressing the clutch? is this something i just need to do by tightening them ? can this be done as i've never seen or tryed or had a car before to notice this type of problem

got no reply to this question ? anyone know what this problem is. ??? help

Yeah i've got this aswell but it is only a very small amount of slackness, i think it is due to the cables being a bit loose and just need to be tightened slightly. And personally i wouldn't go for 13" Alloys and maybe not even 14" ones unless you want to lower your car a lot, i've got 15" alloys and my car is lowered 75mm Front 80mm Rear which is okay for getting over bumps but you can only take two mates in the car before it starts scraping. Be a bit different and just lower your car maybe 50mm alround and fit 16" alloys should look pretty good.

how would i be able to tell if theirs anythign wrong with the pedal box ? or isit just abit of slack in both pedals.

going to think about wheels and lowering after i've payed out for the insurance.

i was thinking maybe going for RH topline aa's if i can't get hold of 15" borbet a's.

anyone think those are a good idea?

how would i be able to tell if theirs anythign wrong with the pedal box ? or isit just abit of slack in both pedals.

going to think about wheels and lowering after i've payed out for the insurance.

i was thinking maybe going for RH topline aa's if i can't get hold of 15" borbet a's.

anyone think those are a good idea?

They both look pretty good, best to just go for what you think looks best not what everyone else thinks

nice tidy motor mate. :)

weld the rear doors up? :p

slam that bad boy on its arse hasslehoff style.. hell yeah!

Create an account or sign in to comment

Recently Browsing 0

  • No registered users viewing this page.

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.