the setup consists of:

mikuni carbs

facet fuel pump

vacuum advance dizzy

fuel presure regulator

coil

slicone hoses from carbs to manifold (and jubilee clips)

ecu and wiring loom

custom made stainless steel manifold

The carbs have already been jetted to 1300cc and all that is needed for this conversion is a head to manifold gasket making.

I'm looking for £300 for everything but might seperate with enough interest.

I also have a 1.4 16v AFH engine code (100Hp)engine for sale that has done 42000miles, this comes with starter motor, flywheel, alterantor, throttle body, inlet manifold, exhuast manifold and down pipe all for £350.

This could be a realy good conversion and cheap to insure but due to new work load I'm not going to get it finished.

thanks for looking.

location, pics and phone number as your a newbie to the forums

any history on the engine

As Above please, mainly interested in the lump...

As Above please, mainly interested in the lump...

i dont know how to add pics no.07868315647

no history of the engine, i heard it running before removal sweet as a nut and i searched long and hard for this good engine but now have to give up the project

location oxfordshire banbury

Edited 20 May, 201016 yr by WOB DOHC

Just text you... Very interested and can collect, we can work something out..

HI guys conversion sold but still have the lump

this'll help you upload pics matey

http://www.clubpolo.co.uk/forum/index.php?showtopic=81153

fancie doing theengine a little cheaper if its still available?

fancie doing theengine a little cheaper if its still available?

still have it make me a offer

hes bought an engine now mate

All Gone